Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
MT
ial damage to third parties or their prop-
erty. The machine is intended to be used
by do-it-yourselfers. It was not designed
for heavy commercial use. The warranty
is void in the case of commercial use. The
manufacturer is not liable for damage
caused by improper use or incorrect oper-
ation.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Biscuit Jointer
• Accessories:
Router blade (pre-assembled), Auxili-
ary handle, Suction nozzle, Dust collec-
tion bag, Height stop, Two-hole key
• Translation of the original instructions
Overview
The illustrations for the
device can be found on
the front and back fold-out
page.
1 Spindle lock
2 Auxiliary handle
3 On/Off switch
4 Dust collection bag
5 Suction nozzle
6 Power cord
7 Drive motor
8 Handle
9 Base plate
10 Scale (Angle adjustment)
11 Locking screw (Angle adjustment)
12 Height adjustment dial
13 Height stop
14 Locking screw (Height adjustment)
22
15 Angle stop
16 Scale (Height adjustment)
17 Two-hole key
Fig. A
18 Anschluss Staubabsaugung
19 Clamps (Dust collection bag)
20 Groove (Suction nozzle)
Fig. B
21 Dial (Milling depth)
22 Screw (Fine adjustment)
Fig. C
23 Screw (Service panel)
24 Service panel
Fig. D
25 Clamping flange
26 Router blade
27 Mounting flange
Fig. F
28 Centre marking, vertical
29 Marking, cutter width
30 Centre marking, horizontal
31 Direction of rotation arrow (Tool)
Fig. G
32 Flat dowel (not included)
Description of functions
The tool enables fast and precise produc-
tion of grooves for flat dowels.
Please refer to the descriptions below for
information on how the operating ele-
ments work.
Technical data
Biscuit Jointer ........... PFDF 900 B2
Rated voltage U ............... 230 V∼, 50 Hz
Rated speed n
..................... 11000 min
0
Weight ............................................≈2.6 kg
Length Power cord ................................3 m
−1
Werbung
