Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Commissioning (qualified contractors)
In a non-domestic environment and in case of par-
ticularly high demands on the appliance, such as
permanent continuous operation, we recommend
that the appliance is installed with a permanent
connection to a junction box.
The appliance is delivered fully wired. The following electrical
connections are permissible:
Connection to a standard safety socket with matching plug
u Ensure that the standard safety socket is easily accessible
once the appliance has been installed.
Permanent connection to a junction box with earth conductor
u Trim the power cable so it leads directly to the junction box.
u Ensure that, after trimming the power cable, the appliance
can still be removed from the wall without a problem.
6
Commissioning (qualified contract-
ors)
The appliance is ready for operation as soon as it has been fixed
to the wall and plugged into the mains.
u Remove the protective film from the programming unit.
7
Operation
D0000112443
1 Programming unit
7.1
Switching the appliance on and off
On initial start-up and after longer breaks in use, an
odour may develop briefly after switching on.
u Switch the appliance on and off using the ON/OFF switch.
u Switch the appliance off when not in use for longer periods
(e.g. during the summer months).
All settings remain intact after switching off or after an interrup-
tion to the power supply. A power reserve in the appliance en-
sures that the day of the week and the time are saved for several
hours. If the appliance has been switched off for a longer time
with a time program activated, you will be prompted to set the
day and time after switching it back on. Until this setting is
made, the appliance will operate in comfort mode.
20
|
1
2
2 ON/OFF switch
7.2
Programming unit
1
D0000112452
1 Display
7.3
Operating buttons
But-
Designation
Description
ton
"Standby" button Switch on the programming unit;
Put programming unit and heating
appliance into standby
"OK" button
Selection;
Confirm settings
"Menu" button
Call up and exit menu
"+" button
Call up menu items;
Change settings
"–" button
Call up menu items;
Change settings
7.4
Display
If no button is pressed for 20 seconds, the backlighting switches
off.
u Press any button to switch the backlighting back on.
Symbols Description
Time indication:
Indication of the current time or a programmed start
time
Time program activated:
The appliance heats in accordance with the enabled
time program.
Comfort mode:
The appliance maintains the set comfort temperature.
Default value: 21.0 °C. Use this setting for comfortable
room temperatures when someone is present.
Setback mode:
The appliance maintains the selected setback temper-
ature.
Default value: 18.0 °C. Use this setting e.g. at night or
when absent for several hours.
Frost protection:
The frost protection symbol is displayed if the room
temperature is set to 7.0 °C.
Use this setting to protect an unused room from frost
damage.
Adaptive start:
With a time program activated, the heating appliance
switching times are adjusted to ensure that the selec-
ted set room temperature is already reached by the
programmed start time.
Requirement: The "adaptive start" function is enabled
(see chapter Standard menu [} 21] ).
2
2 Operating buttons
www.stiebel-eltron.com
Werbung
