Avtech AVH316 Bedienungsanleitung Seite 43

5.4.9 PSE
Note: This function is available only for models with PoE or PoN function.
Users could check the power supply status in this menu, and disconnect power supply to the camera if needed.
CONNECTION
CH1
CAMERA POWER SUPPLY
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
PSE
MULTICASTING
PD CLASS: CLASS 2(170mA)
WATT(mW): 3495
EXIT
5.4.10 MULTICASTING
Note: This function is available only for selected models.
In this menu, users could configure the multicast address and port used for each channel for data streaming.
Three streams for different usage could be configured per channel. These are used for different video data
requests from different clients.
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
PSE
MULTICASTING
EXIT
1) MULTICAST STREAM ADDRESS
Configure the addresses used for the three streams per channel.
The address range for multicasting is from 224.0.0.0 to 239.255.255.255.
Note: The address for each stream per channel should be unique and can't be the same as other
stream in the same channel or other channel.
2) MULTICAST STREAM PORT
Set the event recording function on / off.
Configure the ports used for the three streams per channel.
The port range is from 1 to 65535.
Note: The port for each stream per channel should be unique and can't be the same as other stream in
the same channel or other channel.
All manuals and user guides at all-guides.com
ADVANCED CONFIG
CH2 CH3 CH4
VOLTAGE (V) CURRENT (i)
47.828 86mA 86mA
TOTAL WATT(mW): 3491
ADVANCED CONFIG
CH1 CH2 CH3 CH4
MULTICAST STREAM1 ADDRESS
MULTICAST STREAM1 PORT
STREAM1 TIME TO LIVE(TTL)
MULTICAST STREAM2 ADDRESS
MULTICAST STREAM2 PORT
STREAM2 TIME TO LIVE(TTL)
MULTICAST STREAM3 ADDRESS
MULTICAST STREAM3 PORT
STREAM3 TIME TO LIVE(TTL)
TIMEOUT (SECS)
LIMIT RECORD STREAM TRANSFER
AUTO
MAX MIN AVERAGE
60mA 74mA
239.0.0.1
9000
15
239.0.0.2
9002
15
239.0.0.3
9004
15
50
37
MAIN MENU
STATUS