Avtech AVH316 Bedienungsanleitung Seite 35

5.4.3 DETECTION
CONNECTION CH1
CAMERA
ALARM
DETECTION
INTERNAL ALARM
SENSITIVITY
ALERT
NETWORK MOTION
DISPLAY AREA
RECORD
NOTIFY
PSE
MULTICASTING
EXIT
1) ALARM
Select N.C./ N.O depending on your installation need. The default alarm value is OFF.
2) INTERNAL ALARM
This function appears only when the camera connected supports human detection.
Select "ON" to enable human detection, or "OFF" to disable it.
3) SENSITIVITY
Select the detection sensitivity of the selected channel.
4) MOTION
Select if you want to activate the motion detection function for the selected channel (ON/OFF).
5) AREA
Click "EDIT" to set the motion detection area.
There are 16 × 12 grids per camera for all channels. Pink blocks represent the area that is not being detected
while the transparent blocks are the area under detection.
Note: To exit area setting and return to the detection page, right click your mouse.
5.4.4 ALERT
CONNECTION
EXT. ALERT
CAMERA
INT. BUZZER
DETECTION KEY BUZZER
ALERT VLOSS BUZZER
NETWORK MOTION BUZZER
DISPLAY ALARM BUZZER
RECORD HDD BUZZER
NOTIFY
ALARM DURATION (SEC)
PSE HDD NEARLY FULL (GB)
MULTICASTING HDD OVERHEAT ALERT (°C)
EXIT
1) EXT. ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all internal buzzers: KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to "OFF", item 3) to item 7) will be disabled even though they are set to ON.
All manuals and user guides at all-guides.com
ADVANCED CONFIG
CH2 CH3 CH4
(For selected models only)
(For selected camera models only)
ADVANCED CONFIG
OFF
ON
ON
EDIT
ON
OFF
ON
ON
ON
ON
ON

5

5

70
29
MAIN MENU