Avtech AVH316 Bedienungsanleitung Seite 33

5.4 ADVANCED CONFIG
5.4.1 CONNECTION
To manually assign the address of your camera connected locally, click "URI" to modify.
CONNECTION CHANNEL
CAMERA CH1
DETECTION CH2
ALERT CH3
NETWORK CH4
DISPLAY
RECORD
NOTIFY
PSE
MULTICASTING
EXIT
Then, click "SETUP" to enter the access information of the camera:
CACHE TIME (MSEC)
VENDOR
DEVICE
PROFILE
TYPE
IMAGE SIZE
QUALITY
I.P.S.
AUDIO
RESOLUTION LIST
(For selected models only)
Step1: Click "DEVICE" to detect and make sure the access information you're intended to connect is correct.
Step2: Select the image size, image quality, and I.P.S.
Note: The options selectable for "IMAGE SIZE" and "I.P.S." depends on the camera you're intended to
connect.
Note: The "IMAGE SIZE" options for selected 8CH models are up to 1280 x 720.
Step3: (Optional) For the camera with audio recording, select "ON" or "OFF".
Step4: (For selected models only) Assign the resolution you could choose based on you need. This change will
affect the resolution options you could choose for live viewing and recording.
All manuals and user guides at all-guides.com
ADVANCED CONFIG
AVTECH://ip_office.ddns.eagleeyes.tw:80
ONVIF://10.1.1.14:88
AVTECH://10.1.1.30:88
AVTECH://10.1.1.12:88
CONFIG-CH1
AVTECH
IPCAM(FIXED)
PROFILE-3
H264
720 X 480
30
ON
Select All
EXIT
URI
27
MAIN MENU
CONFIG
SETUP
SETUP
SETUP
SETUP