Avtech AVH316 Bedienungsanleitung Seite 17

3.2.3 Quick Operation
Move to the arrow mark to extend the quick menu bar and show the four functions as follows:
Click to show the channel switch panel and select the channel you want.
Click to display the playback control panel, and click
list.
Click to open the IP search window and check the current connection status of each channel.
Click to show the power off panel to either halt or reboot the system.
3.2.4 Main Menu
Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.
QUICK START
SYSTEM
EVENT INFORMATION
ADVANCED CONFIG
SCHEDULE SETTING
* For selected models only
3.2.5 Playback Panel
Fast Forward
Fast Rewind
Play / Pause
/
Stop
Slow Playback
Previous /
/
Next Hour
Quick Search
Repeat
Backup
All manuals and user guides at all-guides.com
Click to set the status display, image settings, and date & time.
Click to set the system configurations.
Click to enter the event search menu.
Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK, DISPLAY,
RECORD, NOTIFY*, PSE* and MULTICASTING*.
Click to set record timer and event timer.
Increase the speed for fast forward.
Increase the speed for fast rewind.
Click to play the latest recorded video clip immediately, and click again to pause.
In the pause mode, click once to get one frame forward, and click
Click to stop the video playback.
Click once to get 1/4X speed playback, and click twice to get 1/8X speed playback.
Click to jump to the next / previous time interval in an hour, for example, 11:00 ~ 12:00 or
14:00 ~ 15:00, and start playing the earliest event video clip recorded during this whole hour.
Click to enter the quick search menu for specific record data search.
Click to set point A and point B in a video clip, and the system will play only the specified range in
that clip.
Click to open the backup menu for video backup.
11
to play the latest recorded video clip, or click
USER INTERFACE
to enter the search
to get one frame rewind.