Avtech AVH316 Bedienungsanleitung Seite 14

All manuals and user guides at all-guides.com
To solve this, use our brand's IP camera, and reconfigure its IP address to 10.1.1.xx (xx ranges from 11 ~
253), in the same network segment as the recorder.
a) Move your mouse to the left to call the quick bar, and select "
camera with its connection status to this recorder and MAC address.
b) Select the IP address which is not used, and select "SETUP".
IP PORT
10.1.1.12 88
10.1.1.12 88
10.1.1.13 88
10.1.1.13 88
10.1.2.14 88
10.1.2.14 88
10.1.1.15 88
10.1.1.15 88
10.1.1.16 88
10.1.1.16 88
10.1.1.17 88
10.1.1.17 88

c) Select "DHCP" in "NETWORK TYPE".
d) Click "APPLY" and "EXIT" to save your changes.
SETUP
NETWORK TYPE
IP
PORT
USER NAME
PASSWORD
NETMASK
GATEWAY
PRIMARY DNS
e) The recorder will then detect the IP camera and display images soon.
IP SEARCH
MAC TYPE
00:0e:53:e5:9a:f1 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:a6:91:18 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:a5:9f:a2 SWITCH
00:0e:53:a5:9f:a2 SWITCH
00:0e:53:e1:4e:k5 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:s5:3e:h6 IP CAMERA
UNKNOWN IP CAMERA
00:0e:53:e6:4b:26 IP CAMERA
UNKNOWN IP CAMERA
CONNECT
DHCP
10.1.1.14
88
admin
*****
255.0.0.0
10.1.1.10
168.95.1.1
APPLY EXIT
8
". You'll see the list of every connected IP
PROTOCOL STATUS
AVTECH CONNECTED TO CH1
ONVIF CONNECTED TO CH1
AVTECH CONNECTED TO CH2
ONVIF CONNECTED TO CH2
AVTECH UNUSED
AVTECH UNUSED
AVTECH CONNECTED TO CH3
ONVIF CONNECTED TO CH3
AVTECH CONNECTED TO CH4
ONVIF CONNECTED TO CH4
AVTECH CONNECTED TO CH5
ONVIF CONNECTED TO CH5
SETUP EXIT
CONNECTION