Herunterladen Diese Seite drucken

Avtech AVH316 Bedienungsanleitung Seite 34

Hd-videorecorder

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 159
5.4.2 CAMERA
ADVANCED CONFIG
CONNECTION
CH1
CAMERA
BRIGHTNESS
DETECTION
CONTRAST
ALERT
SATURATION
NETWORK
HUE
DISPLAY
COV.
RECORD
REC
NOTIFY
REC AUDIO
PSE
CHANNEL TITLE
MULTICASTING
PORT FORWARD
ENABLE PORT FORWARD
EXIT
1) BRIGHTNESS / CONTRAST / SATURATION / HUE
Click the current value to manually adjust the brightness/contrast/saturation/hue of each channel here.
2) COV.
Select if you want to mask the selected channel under recording (ON / OFF). When this function is activated,
the wording "COV." will be shown on the channel screen.
Note: To hide the wording "COV." when this function is on, go to "DISPLAY", and set "DISPLAY COVERT"
to "OFF". For details, please refer to "5.4.6 DISPLAY" at page 32.
3) REC
Select if you want to enable recording for the selected channel (ON / OFF).
Note: When this function is disabled, no manual, event or timer recording will be activated even if any
of these three record functions is set to "ON".
4) REC AUDIO
Select if you want to enable audio recording for the selected channel (ON / OFF).
Note: This function is available only when your connected device supports audio recording.
5) CHANNEL TITLE
Click "EDIT" to input the channel title (up to six characters). The default title is the channel number.
6) PORT FORWARD / ENABLE PORT FORWARD
These two functions are used when you only want to see a single channel of this recorder remotely.
a) Set the port number for the channel in "PORT FORWARD". The default value for CH1 is 81, and the
default value for CH2 is 82... etc. If you want to change the port number to other value, the range is from
1 ~ 65535.
b) Select "ON" in "PORT FORWARD ENABLE".
The address of the channel will be "http://
Explorer, and see if you can access the device connected channel individually.
Note: The user name and password are still required to access the device connected to the channel.
Make sure you know the user name and password to access the device. For details, please refer
to its user manual.
All manuals and user guides at all-guides.com
CH2
CH3
CH4
recorder_address
28
128
128
128
128
OFF
ON
ON
EDIT
81
ON
:
". Enter the address in Internet
port_number
MAIN MENU

Werbung

loading