Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The set temperature is not reached when operating
with hot water
Working pressure/flow rate too high
1. Reduce the working pressure/flow rate via the pres-
sure/quantity regulator of the pump unit.
Sooty heating coil
1. Have the soot removed from the device by Custom-
er Service.
Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.
Warranty
The warranty conditions issued by our sales company
responsible apply in all countries. We shall remedy pos-
sible malfunctions on your device within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Accessories and spare parts
Note
If the device is connected to a chimney or if the device
cannot be seen, we recommend installing a flame mon-
itor (option).
Only use original accessories and original spare parts.
They ensure that the appliance will run safely and fault-
free.
Information on accessories and spare parts can be
found at www.kaercher.com.
Declaration of Conformity
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: High-pressure cleaner
Type: 1.071-xxx
Currently applicable EU Directives
2000/14/EC
2006/42/EC (+2009/127/EC)
2009/125/EC
2011/65/EU
2014/30/EU
2014/53/EU
2014/68/EU
Category of the assembly
II
Conformity process
Module H
Heating coil
Module H conformity evaluation
Control block
Module H conformity evaluation
Various pipelines
Conformity evaluation Art. 4 Para. 3
26
Harmonised standards used
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014-2: 2015
EN 60335-1
EN 60335-2-79
EN 61000-3-2: 2014
EN 62233: 2008
HDS 9/20-4, HDS 10/21-4, HDS 12/18-4:
EN 61000-3-3: 2013
HDS 13/20-4:
EN 61000-3-11: 2000
Commission Regulation(s)
(EU) 2019/1781
Applied specifications:
AD 2000 based on
TRD 801 based on
Name of stated position:
For 2014/68/EU
TÜV Rheinland Industrie Service GmbH
Am Grauen Stein
51105 Köln
ID no. 0035
Certificate No .:
01 202 111/Q-08 0003
Conformity evaluation procedure used
2000/14/EC: Annex V
Sound power level dB(A)
HDS 9/20-4
Measured: 74
Guaranteed: 93
HDS 10/21-4
Measured: 74
Guaranteed: 93
HDS 12/18-4
Measured: 74
Guaranteed: 93
HDS 13/20-4
Measured: 74
Guaranteed: 93
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/10/01
English
Werbung
