Herunterladen Diese Seite drucken

HEYLO DE2XL Betriebsanleitung Seite 36

Elektroheizer
Vorschau ausblenden Andere Handbücher für DE2XL:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Electric heater DE2XL
Proceed as follows to clean and check the condi-
tion of the device:
a) Move the Operating mode rotary selector to
the 0 position and pull out the mains plug.
b) Wait until the temperature at the outlet nozzle
has dropped to ≤ 30°C.
Cleaning the inside of the device
a) Open the safety cover.
b) Clean the safety cover and the housing with a
damp, lint-free cloth and a mild detergent.
c) Clean the electrical components with com-
pressed air.
d) Wait until all the components that have been
wiped are dry.
e) Close the safety cover as intended at the fac-
tory.
 The device has now been cleaned.
20.2
Customer service by the
manufacturer
If the device states are unclear and you have any
questions about repair, the HEYLO service will be
happy to help.
See also
 Contacting Dantherm GmbH
21
Repairs
The following section describes who may repair
the device and how it can be repaired.
NOTICE
Repairs may only be carried out by staff author-
ised by the manufacturer during the warranty
period of the device.
34 / 36
Repairs performed by the company
operating the device
After the statutory warranty has expired, repairs
may be carried out by the company operating the
device, provided appropriate expertise is shown.
HEYLO will not assume any liability for these re-
pairs.
Contact the HEYLO service department or your
dealer if you have any questions about repairs.
See also
22
The following principles apply for the decommis-
sioning, storage and disposal of the device:
Danger to life due to electric shock
Touching electrically live parts can be fatal.
[
22]
22.1
Temporary decommissioning
Final decommissioning
 Contacting Dantherm GmbH
Decommissioning,
storage and disposal
DANGER
a) Switch off the device and pull out the mains
plug.
Decommissioning
Operating mode
a) Move the
the 0 position.
b) Clean the device (see Cleaning and mainte-
nance
[
33]).
 The device has now been temporarily de-
commissioned.
 Carry out all the steps needed for temporary
decommissioning.
[
22]
rotary selector to
EN

Werbung

loading

Diese Anleitung auch für:

1101922