Customer Service By The Manufacturer; Repairs; Decommissioning, Storage And Disposal; Decommissioning - HEYLO IRE 3 Betriebsanleitung

Heater IRE 3
To order wear and spare parts, please contact your
dealer or HEYLO directly, providing the following
information:
– Device type
– Product number
– Serial number
See also
 Contact to HEYLO GmbH
18.3 Customer service by the
manufacturer
HEYLO recommends taking out a maintenance con-
tract with the HEYLO Service Department.
See also
 Contact to HEYLO GmbH
19

Repairs

This section describes which repair tasks can be
performed by whom.
Repair by manufacturer
NOTICE
During the warranty period, all repairs must be per-
formed by persons authorised by the manufacturer.
For repair by HEYLO, please download the repair
request form from the "Service" section of the
HEYLO website.
Repair by device owner
After the warranty period has elapsed, certain repair
can be carried out by the device owner, provided he
or she has the necessary skills. HEYLO shall not be
liable for damage caused by such repairs.
If you have any questions about repairs, contact the
HEYLO service department or your dealer.
See also
 Contact to HEYLO GmbH
20

Decommissioning,

storage and disposal
The following principles apply for the decommission-
ing, storage and disposal of the device:
– All work must be carried out by trained and au-
thorised technicians.
24 / 26
[ 17]
[ 17]
[ 17]
DANGER
Danger to life due to electric shock
Touching electrically live parts can be fatal.
a) Switch off the device and pull out the mains
plug.
20.1 Decommissioning
a) Switch off the device.
b) Disconnect the power plug.
c) Let the device cool down.
d) Clean the device (see Checking and cleaning
the device [ 23]).
 You have now taken the device permanently out
of service.
20.2

Storing the device

Store the device dry and free of frost.
See also
 Technical details
[ 24]
20.3

Disposal

The device is primarily made of recyclable materials.
It does not represent any danger to the operator and
the environment when handled properly. However,
operation of the device may lead to the generation of
waste and waste water containing harmful and/or
environmentally hazardous substances (air filters
and condensate). These materials must be disposed
of properly according to the statutory regulations.
The individual components of the device (e.g.
pumps, metal components, etc.) must be taken to a
qualified disposal and recycling company. Commis-
sion a qualified, specialist company to dispose of
and recycle the device.
See also
 Contact to HEYLO GmbH
[ 17]
EN