HEYLO DE2XL Betriebsanleitung Seite 37

a) Disconnect all the incoming and outgoing
lines (power supply lines).
 You have now taken the device permanently
out of service.
See also
 Contacting Dantherm GmbH
22.2 Storing the device
Store the device dry and free of frost.
See also
 Technical details [ 35]
 Operating conditions [
22.3 Disposal
The device is largely made of recyclable materials.
It does not represent any danger to the operator
and the environment when handled properly.
However, operation of the device may lead to the
generation of waste and waste water containing
harmful and/or environmentally hazardous sub-
stances (air filters). These materials must be dis-
posed of properly in accordance with the regula-
tions.
The individual components of the device (e.g.
metal components, etc.) must be taken to a quali-
fied disposal and recycling company. Appoint a
qualified, specialist company to dispose of and
recycle the device.
See also
 Contacting Dantherm GmbH
23 Technical details
Type:
Temperature range [°C]
Nominal heating output [kW]
EN
[ 22]
25]
[ 22]
DE2XL
+5 - +30
2.0
Type:
Air throughput [m 3 /h]
Sound level at a distance of
3 m [dB(A)]
Power connection [V/Hz]
IP enclosure class
Current consumption [A]
Fuse protection [A]
Set values for ventilate/heat
50%/heat 100% [W]
Temperature limit for manually-
resetting thermostat [°C]
Length [mm]
Width [mm]
Height [mm]
Weight [kg]
NOTICE
The technical details may be changed without
prior notice during the course of development.
Some of the values are approximate.
24 Supplementary
documents
24.1 Declaration of conformity
EC Declaration of Conformity IIA
In accordance with the EC Machin-
ery Directive 2006/42/EC
For device series: Electric heaters
Type: DE2XL
DANTHERM GmbH, of Im Finigen 9, 28832 Achim,
declares that the machines specified comply with
Electric heater DE2XL
DE2XL
90
47
220-240 / 50
20
8.7
10
25/1000/2000
80
185
180
280
2.8
35 / 36