Mankenberg RP 824 Originalbetriebsanleitung Seite 29

Original operating manual
pilot-operated pressure regulators RP 824
18.17 Setting the pressure
Back pressure regulators are normally supplied by us with a relaxed spring. This means that a valve is set at the
factory to the minimum inlet pressure. The required pressure should be set under operating conditions.
18.18 Maintenance
Back pressure regulators must be cleaned and serviced regularly.
18.19 Valves free of oil and grease or silicone
Please pay attention to order and fit only spares free of oil and grease resp. free of silicone.
29
RP 824-4.X.231 Issue 17.11.2023 www.mankenberg.com