ROBBE Power Peak Quad EQ-BID 230 V Bedienungsanleitung Seite 41

Power Peak® Quad EQ-BID 230 V
+/-
Button
+/-
Button
+/-
Button
'ENTER'-
Button
8.2 PROGRaMMING chIP/KEy (ExaMPLE: PROGRaMMING ThE DaTE)
The programming procedure is started in this screen display after you press the 'ENTER'
the parameters in manual mode (see Section 7.3). To keep track of the data, a date can
be entered in the form 'YYYY-MM-DD', instead of setting up an acoustic signal control.
The programming of the date information is initiated by pressing ENTER. In addition to
the '+' and '-' signs the year flashes in the top line. It can be updated with the 'INC' or
'DEC' button. After pressing ENTER again, the month flashes and can be edited with
the 'INC'/DEC-' button. The day is set in the same way. The setting is finally entered to
Operating Instructions
'ENTER'-
Button
'ENTER'-
Button
'ENTER'-
Button
button to activate the programming loop.
Finally, all parameters can then be specified by
following exactly the same procedure as for setting
memory by pressing ENTER.
+/-
Button
+/-
Button
+/-
Button
17
Order No.
8196
'ENTER'-
Button
'ENTER'-
Button
'ENTER'-
Button