ROBBE Power Peak Quad EQ-BID 230 V Bedienungsanleitung Seite 30

Power Peak® Quad EQ-BID 230 V
3. cONTROLS
Voltage sensor
connection
3.1 DEScRIPTION Of cONTROLS
As indicated by the labelling, the 4 operating buttons on the Power Peak® Quad EQ-BID
230V have several functions. The buttons trigger different actions in different operating
situations.
'DEc' / MODE / aUTO BUTTON
• In manual mode this button is used to reduce the values of the charging parameters by
one during set-up and select the previous menu in the menu selection.
• The required operation (CHARGE, DISCHARGE or DISCHARGE->CHARGE) can be
pre-selected with the MODE button.
• After connecting to the supply voltage, this button is used to activate "automatic mode"
(AUTO.) in the selection menu.
'INc' / STaRT / MaN BUTTON
• In Manual Mode- during set-up, this button is used to increase the value of the charge
parameter by one and select the next menu in the menu selection.
• The START button is pressed to start the selected operation, e.g. CHARGE.
• After connecting to the supply voltage, this button is used to select "manual mode"
(MANUAL) in the start screen selection menu.
• The 'INC' button is also used to select the required language. The language selection
menu is accessed by pressing the 'INC' while connecting the supply voltage.
Operating Instructions
Display
Battery connection (red=„+", black="-")
Menu control
buttons
BID-
connection:
6
Order No.
8196