ROBBE Power Peak Quad EQ-BID 230 V Bedienungsanleitung Seite 26

Power Peak® Quad EQ-BID 230 V
Dear customer,
Thank you for purchasing the Power Peak® Quad EQ-BID 230 V automatic battery char-
ger from the robbe range. You now have a compact quad battery charger, featuring battery
management and an equalizer, designed for connection to switched power supply unit or
a 230 V AC source.
Despite being extremely easy to use, the use still needs to be aware of certain aspects in
order to effectively operate a sophisticated, automatic battery charger such as the Power
Peak ® Quad EQ-BID 230 V. These operating instructions will quickly enable you to fami-
liarise yourself with the charger.
To achieve this, you should, nevertheless, take care to thoroughly read the operating
instructions and safety information before using your new charger.
We wish you every success and enjoyment in using your new battery charger!
These instructions only describe a single charge output, and are the same for all
four outputs since they operate on the same principle!
!
SafETy NOTES
Detailed safety information on how to safely use battery chargers and on the diffe-
rent types of batteries is provided at the end of these operating instructions.
REaD this safety information and the safety notes BEfORE using the battery char-
ger for the first time.
Using batteries and batteries chargers in an incorrect or inappropriate manner can
cause batteries to explode and catch fire.
LIaBILITy ExcLUSION
This battery charger is designed and approved solely for the purpose of charging
the batteries defined in the operating instructions. robbe Modellsport shall accept
no liability whatsoever if the charger has been used for any other than the inten-
ded purpose.
Adhering to the instructions, the conditions and methods of use, as well as applicati-
on chosen, the maintenance of the charger and the batteries cannot be supervised by
robbe Modellsport. For this reason we accept no liability for loss, damage or costs which
are due to the erroneous use and operation of our products, or are connected with such
operation in any way.
Regardless of the legal argument employed, our obligation to pay compensation is limi-
ted to the invoice value of those robbe products directly involved in the event in which
the damage occurred, unless otherwise prescribed by law. This does not apply if the
company is deemed to have unlimited liability according to statutory regulation due to
deliberate or gross negligence.
Operating Instructions
2
Order No.
8196