Stihl KGA 770.0 Gebrauchsanleitung Seite 27

10 Switching the Push Sweeper On/Off
► Insert the battery (1) into the battery compart‐
ment (2) as far as it will go.
The battery (1) engages with a click and is
now locked.
9.2 Removing the Battery
► Place the push sweeper on a level surface.
1
► Press both locking levers (1).
The battery (2) is now unlocked and can be
removed.
10 Switching the Push
Sweeper On/Off
10.1 Switching the push sweeper on
► Manually move the rocker switch (1) to posi‐
tion I.
The circular brushes and sweeper drum
assembly begin to turn.
10.2 Switching the Push Sweeper
Off
► Set the rocker switch to position 0.
► Wait until the circular brushes and the
sweeper drum assembly no longer turn.
► If the circular brushes and the sweeper drum
assembly continue to turn: Remove the battery
and contact your STIHL authorized dealer for
assistance.
The push sweeper malfunctions.
0458-769-9801-A
1
2
1
11 Checking the Push
Sweeper and Battery
11.1 Checking the Controls
Switching the push sweeper on
► Insert the battery.
► Set the rocker switch to position I.
The circular brushes and sweeper drum
assembly begin to turn.
► If 3 LEDs are flashing red: Remove the battery
and consult a STIHL authorized dealer.
The push sweeper malfunctions.
► Set the rocker switch to position 0.
Wait until the circular brushes and the
sweeper drum assembly no longer turn.
► If the circular brushes and the sweeper drum
assembly continue to turn: Remove the battery
and contact your STIHL authorized dealer for
assistance.
The push sweeper malfunctions.
11.2 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use
the battery and contact your STIHL servicing
dealer.
There is a malfunction in the battery.
12 Working with the push
sweeper
12.1 Holding and guiding the push
sweeper
► Hold the push handle with both hands so that
your thumbs wrap around the push handle.
12.2 Adjusting the Height of the Cir‐
cular Brushes
The height of the circular brushes can be set to 7
positions, depending on the application.
– Stage 1 and Stage 2: for level surfaces
– Stage 3 and Stage 4: for uneven surfaces, wet
leaves or sand
English
27