Herunterladen Diese Seite drucken

Stihl KGA 770.0 Gebrauchsanleitung Seite 26

Vorschau ausblenden Andere Handbücher für KGA 770.0:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
English
recommended temperature ranges,
actual charging time may vary from the charging
time indicated. The charging time is indicated at
www.stihl.com/charging-times.
► Recharge the battery as described in the User
Manual for the STIHL AL 101, 301, 301-4, 500
chargers.
6.2
Displaying the charge level
1
► Press the button (1).
The LEDs light up green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.3
LEDs on the Battery
The LEDs can indicate the state of charge of the
battery or any faults. The LEDs can may light up
steady or flash in green or red.
If the LEDs light up steady or flash green, this
indicates the state of charge of the battery.
► If the LEDs light up steady or flash red: Trou‐
bleshooting,
19.1.
The push sweeper or battery malfunctions.
7
Activating and Deactivating
Bluetooth® Radio Interface
7.1
Activating the Bluetooth
Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH
" LED next to the
lights up blue for approximately 3 seconds.
®
The Bluetooth
radio interface on the battery
is activated.
7.2
Deactivating the Bluetooth
Radio Interface
► If the battery has a Bluetooth
Press and hold the pushbutton until the
®
"BLUETOOTH
" LED next to the
lights up blue six times.
26
7 Activating and Deactivating Bluetooth® Radio Interface
20.4. The
80-100%
60-80%
40-60%
20-40%
0-20%
Radio
®
®
radio interface:
symbol
®
®
radio interface:
symbol
®
The Bluetooth
radio interface on the battery
is deactivated.
8
Assembling the push
sweeper
8.1
Attaching the Push Sweeper
The push handle can be attached in 2 positions,
depending on the height of the user.
► Adjust the push handle to suit the user's
height.
► Switch off the push sweeper and remove the
battery.
1
► Align both holders (1) to an upright position.
► Slide the push handles (2) simultaneously into
the holders (1).
The spring clips (3) must engage audibly.
9
Removing and Fitting the
Battery
9.1
Inserting the Battery
1
2
2
2
3
3
1
1
0458-769-9801-A

Werbung

loading