Stihl KGA 770.0 Gebrauchsanleitung Seite 20

English
NOTICE
■ This symbol indicates dangers that can cause
damage to property.
► The measures indicated can avoid damage
to property.
2.3 Symbols in Text
This symbol refers to a chapter in this
instruction manual.
3 Overview
3.1 Push Sweeper and Battery
1
18
16
17
15
#
12
13
1 Push handle
The push handle is intended for holding and
controlling the push sweeper.
2 Locking lever
The locking lever holds the battery in the bat‐
tery compartment.
3 Battery compartment
The battery compartment holds the battery.
4 Reset button
The reset button resets the overload protec‐
tion after it has been triggered.
5 Rocker switch
The rocker switch is used to switch the push
sweeper on and off.
6 Air filter
The air filter filters the intake air.
7 Sweeper drum assembly
The sweeper drum assembly guides vac‐
uumed dust and dirt into the container.
20
2 3
4
#
5
6
7
8 9
10
14
8 Container
The container collects the dirt.
9 Handle
The handle serves to remove and carry the
container.
10 Rotary switch
The rotary switch is used to set the height of
the circular brushes.
11 Carrying handle
The carrying handle is used to carry the push
sweeper.
12 Hold-down device
The hold-down device pushes down the bris‐
tles of the circular brush on to the ground.
13 Guide roller
The guide roller guides the push sweeper
along walls or curbstones.
14 Circular brush
The circular brushes serve to sweep up dirt.
15 Battery
The battery supplies the push sweeper with
energy.
16 LEDs
The LEDs indicate the state of charge of the
battery and any faults.
11
17 Button
The pushbutton activates the LEDs on the
battery. The pushbutton activates and deacti‐
vates the Bluetooth® interface (if available).
18 "BLUETOOTH
)
The LED indicates the activation and deacti‐
vation of the Bluetooth® interface.
# Rating plate with machine number
3.2 Symbols
The symbols may appear on the push sweeper
and the battery. Their meaning is as follows:
The surface pressure is too high.
The surface pressure is too low.
Turn in this direction to increase the
surface pressure.
1 LED lights up steady red. The battery
is too warm or too cold.
4 LEDs flash red. There is a fault in the
battery.
Guaranteed sound power level in
L
accordance with Directive 2000/14/EC
WA
3 Overview
®
" LED (only for batteries with
0458-769-9801-A