Herunterladen Diese Seite drucken

IKEA LAGAN Bedienungsanleitung Seite 32

Vorschau ausblenden Andere Handbücher für LAGAN:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 20
button and within 4 seconds close the door: the timer
The start time of the program may be delayed for a period
ENGLISH
will begin counting down.
of time between 1 and 12 hours.
3. Once this time has elapsed, the indicator light «h»
1. Press the DELAY button: the corresponding «h» symbol
switches off and the wash cycle begins.
DELAY
appears on the display; each time you press the button,
To adjust the delay time and select a shorter period of time,
ESPAÑOL
The start time of the program may be delayed for a period
the time (1h, 2h, etc. up to max. 12h) from the start of
press the DELAY button. To cancel it, press the button
of time between 1 and 12 hours.
the selected wash cycle will be increased.
repeatedly until the selected delayed start indicator light
1. Press the DELAY button: the corresponding «h» symbol
2. Select the wash program, press the START/PAUSE
«h» switches off.
DELAY
appears on the display; each time you press the button,
button and within 4 seconds close the door: the timer
The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period
the time (1h, 2h, etc. up to max. 12h) from the start of
will begin counting down.
has been started.
of time between 1 and 12 hours.
Tabla de programas
the selected wash cycle will be increased.
3. Once this time has elapsed, the indicator light «h»
1. Press the DELAY button: the corresponding «h» symbol
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
appears on the display; each time you press the button,
button and within 4 seconds close the door: the timer
To adjust the delay time and select a shorter period of time,
will begin counting down.
the time (1h, 2h, etc. up to max. 12h) from the start of
press the DELAY button. To cancel it, press the button
the selected wash cycle will be increased.
3. Once this time has elapsed, the indicator light «h»
repeatedly until the selected delayed start indicator light
Programa
2. Select the wash program, press the START/PAUSE
switches off and the wash cycle begins.
«h» switches off.
button and within 4 seconds close the door: the timer
The DELAY function cannot be set once a wash cycle
To adjust the delay time and select a shorter period of time,
will begin counting down.
press the DELAY button. To cancel it, press the button
has been started.
3. Once this time has elapsed, the indicator light «h»
repeatedly until the selected delayed start indicator light
1
Eco
switches off and the wash cycle begins.
1 Eco
«h» switches off.
The DELAY function cannot be set once a wash cycle
To adjust the delay time and select a shorter period of time,
press the DELAY button. To cancel it, press the button
has been started.
Conventional
2
repeatedly until the selected delayed start indicator light
wash and dry
«h» switches off.
2 Lavado rápido 40'
The DELAY function cannot be set once a wash cycle
Intensive
3
has been started.
Eco
3 Intensivo
1
Fast
4
Conventional
2
Sanitizing
5
wash and dry
Eco
1
4 Mezclado
Intensive
3
Pre-Wash
6
Conventional
2
wash and dry
Eco
5 Vidrio
1
4
Fast
Self-Clean
7
3
Intensive
Conventional
2
Sanitizing
5
wash and dry
Fast
4
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Los datos del programa ECO se miden bajo condiciones de laboratorio de conformidad con la Norma europea EN 60436:2020.
Intensive
3
Pre-Wash
6
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Nota para laboratorios de prueba: Para obtener información sobre las condiciones de la prueba EN comparativa, envíe un correo electrónico a
address: dw_test_support@whirlpool.com
Sanitizing
5
la siguiente dirección:
Pre-treatment of the dishes is not needed before any of the programs.
Fast
4
Self-Clean
dw_test_support@whirlpool.com
7
*) Not all options can be used simultaneously.
No es necesario ningún tratamiento previo de la vajilla antes de ninguno de los programas.
Pre-Wash
6
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
*) Los valores indicados para los programas distintos al programa Eco son indicativos. El tiempo real puede variar dependiendo de muchos
Sanitizing
5
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factores como la temperatura y la presión del agua de entrada, la temperatura ambiente, la cantidad de detergente, la cantidad y el tipo de
load, load balancing, additional selected options and sensor calibration.
Self-Clean
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
carga, la colocación de la carga, las opciones adicionales seleccionadas y la calibración del sensor.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-Wash
6
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com
1. ECO: El programa Eco es adecuado para lavar utensilios con suciedad normal, para este uso es el programa más eficiente en términos de
PROGRAMS DESCRIPTION
Pre-treatment of the dishes is not needed before any of the programs.
consumo combinado de energía y agua, y se utiliza para valorar el cumplimiento con la legislación de Ecodiseño de la UE.
Self-Clean
7
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
*) Not all options can be used simultaneously.
2. LAVADO RÁPIDO 40' - Programa para cantidades limitadas de vajilla con suciedad normal. Garantiza un lavado óptimo en poco tiempo.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
3. INTENSIVO - Programa recomendado para vajilla muy sucia, en especial para ollas o sartenes (no se debe utilizar para artículos delicados).
address: dw_test_support@whirlpool.com
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
4. MEZCLADO - Suciedad mezclada. Para vajilla con suciedad normal con residuos de comida secos.
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
5. VIDRIO - Programa para vajilla delicada sensible a altas temperaturas como vasos o tazas.
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
address: dw_test_support@whirlpool.com
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
PROGRAMS DESCRIPTION
Pre-treatment of the dishes is not needed before any of the programs.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Modificación de un programa en curso
Si se ha equivocado al seleccionar el programa, se puede cambiar, siempre que acabe de empezar: abra la puerta, mantenga pulsado el botón
PROGRAMS DESCRIPTION
ENCENDIDO/APAGADO; la máquina se apagará. Vuelva a encender la máquina con el botón ENCENDIDO/APAGADO y seleccione el nuevo ciclo
de lavado y cualquier opción que se desee; Inicie el ciclo de lavado pulsando el botón INICIO/Pausa y cerrando la puerta en un plazo de 4 seg.
Si tarda más de 4 segundos, el aparato se detiene automáticamente y debe reiniciarlo de nuevo repitiendo la última operación.
Añadir más vajilla
Abra la puerta sin apagar el aparato (el led de INICIO/Pausa empieza a parpadear) (¡cuidado con el valor CALIENTE!) y ponga la vajilla
dentro del lavavajillas. Pulse el botón INICIO/Pausa y cierre la puerta en un plazo de 4 seg; el ciclo se reanudará desde el punto en el cual se
interrumpió.
Interrupciones accidentales
Si se abre la puerta durante el ciclo de lavado, o si hay un corte de corriente, el ciclo se pausa. Pulse el botón INICIO/Pausa y cierre la puerta en
un plazo de 4 seg; el ciclo se reanudará desde el punto en el cual se interrumpió.
Fase
Program
de secado
50°
50°
55°
45°
-
Program
65°
50°
65°
Program
-
50°
55°
65°
50°
55°
Program
65°
-
-
55°
50°
45°
-
50°
-
65°
65°
55°
65°
-
50°
65°
-
-
65°
-
50°
-
65°
-
-
65°
-
65°
-
-
-
65°
Para descargar la versión completa, visite www.ikea.com
added together with the dishwasher. To see how to mount protec-
tion foil please refer to (INSTALLATION GUIDE).
NaturalDry
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
Door opening system NaturalDry is a convection drying system
button (6 sec).
which automatically opens the door during/after drying phase to
2. You switched to NaturalDry Control Menu, you could change
ensure exceptional drying performance every day. Door opens at
NaturalDry
status of NaturalDry functionality by pressing
the temperature that is safe to your kitchen furniture.
E
d
– enabled
As additional steam protection, special designed protection foil is
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
added together with the dishwasher. To see how to mount protec-
which automatically opens the door during/after drying phase to
press and hold
button (3 sec).
tion foil please refer to (INSTALLATION GUIDE).
ensure exceptional drying performance every day. Door opens at
NaturalDry
NaturalDry functionality could be disabled by the user as follows:
the temperature that is safe to your kitchen furniture.
1. Go to the Dishwasher software menu pressing and holding
As additional steam protection, special designed protection foil is
Door opening system NaturalDry is a convection drying system
button (6 sec).
added together with the dishwasher. To see how to mount protec-
which automatically opens the door during/after drying phase to
2. You switched to NaturalDry Control Menu, you could change
tion foil please refer to (INSTALLATION GUIDE).
ensure exceptional drying performance every day. Door opens at
Duración del
Duration of
status of NaturalDry functionality by pressing
NaturalDry functionality could be disabled by the user as follows:
the temperature that is safe to your kitchen furniture.
E
d
programa de lavado
Available
wash pro-
– enabled
1. Go to the Dishwasher software menu pressing and holding
As additional steam protection, special designed protection foil is
To confirm the change and exit from the Control Menu please
(h:min)*)
options
added together with the dishwasher. To see how to mount protec-
button (6 sec).
gram
*)
press and hold
button (3 sec).
2. You switched to NaturalDry Control Menu, you could change
tion foil please refer to (INSTALLATION GUIDE).
(h:min)
NaturalDry functionality could be disabled by the user as follows:
status of NaturalDry functionality by pressing
E
d
1. Go to the Dishwasher software menu pressing and holding
– enabled
3:35
To confirm the change and exit from the Control Menu please
button (6 sec).
2. You switched to NaturalDry Control Menu, you could change
press and hold
button (3 sec).
Duration of
status of NaturalDry functionality by pressing
E
d
Available
wash pro-
– enabled
0:40
To confirm the change and exit from the Control Menu please
options
gram
*)
-
press and hold
button (3 sec).
(h:min)
Duration of
Available
wash pro-
2:40
-
options
gram
*)
(h:min)
Duration of
-
Available
wash pro-
2:15
options
gram
*)
-
(h:min)
-
1:40
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
button:
– disabled
Consumo
Consumo
button:
Water
Energy
de agua
energético
– disabled
consumption
consumption
(litros/ciclo)
(kWh/ciclo)
(litres/cycle)
(kWh/cycle)
**)
button:
– disabled
2:45
12.0
9,5
2:00
15.0
button:
Water
Energy
– disabled
9,0
consumption
consumption
(litres/cycle)
(kWh/cycle)
2:30
15.0
**)
Water
Energy
2:45
12.0
18.0
consumption
consumption
0:55
11.5
(litres/cycle)
(kWh/cycle)
**)
2:00
15.0
Water
Energy
1:40
11.5
2:45
12.0
16,0
consumption
consumption
(litres/cycle)
(kWh/cycle)
2:30
15.0
**)
0:10
4.5
2:00
15.0
2:45
12.0
11,5
0:55
11.5
0:50
8.0
2:30
15.0
2:00
15.0
1:40
11.5
0:55
11.5
2:30
15.0
0:10
4.5
1:40
11.5
0:55
11.5
0:50
8.0
0:10
4.5
1:40
11.5
0:50
8.0
0:10
4.5
0:50
8.0
9
32
0.92
0,95
1.35
0,50
1.50
0.92
1,60
1.10
1.35
1.30
0.92
1,40
1.50
0.01
1.35
0.92
1,20
1.10
0.80
1.50
1.35
1.30
1.10
1.50
0.01
1.30
1.10
0.80
0.01
1.30
0.80
0.01
0.80

Werbung

loading