PeakTech 2790 Bedienungsanleitung Seite 25

7. Measuring Procedure (P 2790)
1. Press the MEAS-key to switch-on the instrument
2. Press the function key MODE for choosing the corresponding
function
3. Apply a reflective mark to the object being measured
4. Press and hold the MEAS-key and align the visible light beam
applied target.
Note:
Verify that the MONITOR INDICATOR lights when the target
aligns with the beam
8. Photo/Contact Tachometer (P 2795)
Measuring Range:
PHOTO TACH:
CONTACT TACH:
SURFACE SPEED:
Resolution:
PHOTO TACH:
CONTACT TACH:
SURFACE SPEED:
2,5 to 99999 RPM
2 to 19999 RPM
0,05 to 1.999,9 (m/min.)
0,1 RPM (2 to 9999,9 RPM)
1 RPM (over 10000 RPM)
0,1 RPM (0,5 to 999,9 RPM)
1 RPM (over 1000 RPM)
0,01 m/min (0,05 to 99,99 m/min)
0,1 m/min (over 100 m/min)
-24-