Parkside PDSP 1000 E6 Originalbetriebsanleitung Seite 7

NOTE
► Please heed the safety instructions provided
by the manufacturer of the blasting medium.
■ Use only materials that are suited for use in the
compressed air sandblaster gun
quartz sand. This can lead to a dangerous
build-up of silicosis-inducing dust.
■ Take steps to ensure that others are not incon-
venienced (dust formation).
■ Ensure that the blasting medium is collected so
that it can be disposed of in an environmentally
friendly manner.
■ Do not remove any type plates. These contain
important information for the safe operation of
the appliance.
■ If you are inexperienced with the appliance,
seek training in how to use it safely.
WARNING! TOXIC DUST!
► Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity.
CAUTION!
► Ensure that the appliance is disconnected
from the air supply when not in use, when
exchanging accessories or during repair work.
The air hose should not be under pressure.
■ 4 │ GB │ IE
Operation
Mount the collecting bag
for sandblasting material
■ Use a screwdriver to attach the collecting
. Do not use
bag
screw clip
Select and fitting attachments
■ Start by selecting the appropriate attachment
for the job at hand ( ,
■ Push the selected attachment firmly onto the jet
nozzle
the sides.
Filling the blasting medium container
CAUTION!
► Before you open the screw cap
blasting medium container
other settings, the connection to the
compressed air hose must be disconnected
and all pressure completely discharged.
■ Use only suitable blasting media
sandblasting work.
NOTE
► We recommend using a blasting medium
(ground blast furnace slag) with a grain size
of 0.2–0.8 mm and which has been shown
not to cause silicosis.
■ Please ensure that the blasting medium
totally dry and not too coarse-grained.
NOTE
► The maximum grain size is 0.8 mm.
■ Open the screw cap
container
■ Fill the required amount of blasting medium
into the blasting medium container
■ Ensure that you do not exceed the maximum
fill level for the container of 900 ml.
■ Afterwards, close the screw cap
blasting medium container
clockwise.
to the appliance with the supplied
.
,
, ensuring that no air can escape from
on the blasting medium
by turning it anticlockwise.
PDSP 1000 E6
, ).
on the
, or make any
for your
is
.
on the
by turning it