Christopeit Sport CT 4 Montage- Und Bedienungsanleitung Seite 23

Step 8:
Attach the saddle (102) and saddle slide (101) at saddle support
(100) and the saddle support (100) at main rame (1).
1. Push the saddle (102) with saddle bracket into the saddle slide
(101) and tight it up in desired position.
2. Place the saddle slide (101) into the holder o saddle support
(100), set it at the desired horizontally position and screw it onto
the saddle support (100) by xing piece (104), washer (105) and
star grip nut (106).
3. Push the saddle support wrapping (108) onto the saddle support
(100). Push the saddle support tube (100) into the matching
locator in the main rame (1), set it at the desired position and
lock it by inserting the star grip screw (107) in place and doing
it up tight.
(Note: To screw in the star grip screw (107), the threaded hole
in the main rame (1) and one o the holes in the saddle support
(100) must be aligned. Furthermore, ensure that the saddle
support (100) is not pulled out o the main rame beyond the
marked maximum Position. The setting o the saddle post can
be adjusted as desired later.) Attention: Ensure beore every
exercising that the saddle is tighten rmly.
Step 9:
Checks
1. Check the correct installation and unction o all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, amiliarise yoursel with the ma-
chine at a low resistance setting and make your individual
adjustments.
Note:
Please keep the tool set and the instructions in a sae place as
these may be required or repairs or spare parts orders becoming
necessary later.
23