Fronius CrashBox Robacta Drive CMT-PAP Installationsanleitung Seite 10

Installing the CrashBox Robacta Drive CMT PAP
on the robot
Safety
Work that is carried out incorrectly can cause serious injury and damage.
The following activities may only be carried out by trained and qualified person-
nel. Observe the safety rules in the power source operating instructions.
An electric shock can be fatal.
Before carrying out any work on the device:
▶
▶
Installing the
CrashBox Ro-
bacta Drive CMT
PAP on the robot
10
WARNING!
WARNING!
turn the power source mains switch to the "O" position
disconnect the power source from the mains
(1) (2)
(3)
Fit the robot flange (1) to the robot
1
with the supplied screws (2)
Remove the front safety clamp (3)
2
(4) from the CrashBox (4)