Werbung
4.3. LED status Indicators
SunPower Drive is equipped with a color LED to visualize the working status of the charging
station.
Lighting effects
Green indicator
is always on.
Blue indicator is
always on.
Blue indicator is
flashing quickly.
Blue indicator
is pulsing /
breathing.
Blue indicator is
flashing slowly.
Continuous red
indicator
© 2023 Maxeon Solar Technologies, Ltd. All rights reserved. | 549549 Revision A - October 2023
Specifications included in this document are subject to change without notice
Meanings
The charging station is
in standby state without
failure.
The charging connector is
connected.
RFID card authentication
(when activated in the
ev.energy app settings)
Charging is in progress
Suspended charging
Failure or E-Stop is
activated.
Subsequent operation
Correctly connect the charging
connector to the vehicle.
Start charging through the
ev.energy app
Wait for authentication to
complete
The vehicle is in a charging
state (when smart charging is
enabled in the ev.energy app
settings, charging is managed
automatically and vehicle will be
charged according to charging
schedule)
Check the vehicle screen for
failure: If any failure is found,
disconnect the charger & check if
the charging capacity has been
limited by the grid or ev.energy;
if the failure is still displayed,
please consult the vehicle dealer;
If not, the grid side has limited the
charging capacity.
Remove the faults according to
the troubleshooting measures in
the "Troubleshooting" section; if
the problem cannot be solved,
please contact your dealer or
service provider.
10
Werbung
