Useful Information; Caractéristiques Techniques - Atlas Copco ETP SL21-01-I06-PS Sicherheitshinweise

ETP SL21-01-I06-PS
• Do not ignore symptoms such as persistent or recur-
ring discomfort, pain, throbbing, aching, tingling,
numbness, burning sensation, or stiffness. Stop using
the tool, tell your employer and consult a physician.
Workplace hazards
• Slip/Trip/Fall is a major cause of serious injury or
death. Cluttered areas and benches invite injuries.
• Do not use in confined spaces. Beware of crushing
hands between tool and workpiece, especially when un-
screwing.
• High sound levels can cause permanent hearing loss.
Use hearing protection as recommended by your em-
ployer or occupational health and safety regulations.
• Ensure that the workpiece is securely fixed.
• Repetitive work motions, awkward positions and ex-
posure to vibration can be harmful to hands and
arms. If numbness, tingling, pain or whitening of the
skin occurs, stop using tool and consult a physician.
• Proceed with care in unfamiliar surroundings. Be
aware of potential hazards created by your work activity.
This tool is not insulated from coming into contact with
electric power sources.
• To reduce risk of injury, everyone using, installing, re-
pairing, maintaining, changing accessories on, or work-
ing near this tool must read and understand these instruc-
tions before performing any such task.
• Our goal is to produce tools that help you work safely
and efficiently. The most important safety device for this
or any tool is YOU. Your care and good judgment are
the best protection against injury. All possible hazards
cannot be covered here, but we have tried to highlight
some of the important ones.
• Only qualified and trained operators should install, ad-
just or use this power tool.
• This tool and its accessories must not be modified in any
way.
• Do not use this tool if it has been damaged.
• If the rated speed or hazard warning signs on the tool
cease to be legible or become detached, replace without
delay.
For additional safety information consult:
• Other documents and information packed with this
tool.
• Your employer, union and / or trade association.
• Further occupational health and safety information
can be obtained from the following web sites:
• http://www.osha.gov (USA)
• https://osha.europa.eu/ (Europe)
DO NOT DISCARD – GIVE TO USER
© Atlas Copco Industrial Technique AB - 9836 2813 00

Useful Information

Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Atlas Copco
website.
Please visit: www.atlascopco.com.
ServAid
ServAid is a portal that is continuously updated and contains
Technical Information, such as:
• Regulatory and Safety Information
• Technical Data
• Installation, Operation and Service Instructions
• Spare Parts Lists
• Accessories
• Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local
Atlas Copco representative.
Caractéristiques techniques
Données produit
Tension du moteur
Puissance du moteur
Vitesse
Plage de couple
Poids
Déclarations
Responsabilité
De nombreux événements dans l'environnement d'exploita-
tion peuvent affecter le processus de serrage et nécessiteront
une validation des résultats. Conformément aux normes et rè-
glements applicables, nous vous invitons par la présente à
contrôler le couple installé et le sens de rotation après tout
évènement susceptible d'avoir une incidence sur le résultat
du serrage. Voici des exemples non exhaustifs de ces évène-
ments :
• installation initiale du système d'outillage
• modification de lot de pièces, boulon, lot de vis, outil,
logiciel, configuration ou environnement
• modification des branchements pneumatiques ou élec-
triques
• changement dans l'ergonomie de la ligne, le processus,
les procédures de qualité ou les pratiques
• changement d'opérateur
• tout autre changement ayant une incidence sur le résultat
du processus de serrage
Safety Information
35 V 3 a.c.
140 W
3000 tr/min
0.3 - 1.2 Nm ( - ft lb)
0.85 kg (1.9 lb)
7