Pioneer CJ-V51 Bedienungsanleitung Seite 6

CONNECTION
(Front)
@ Loosen cap.
@ Insert wire.
@ Tighten cap.
NOTE:
Do not allow any of the cord's conductors to protrude from the
terminals or touch any other conductors. Malfunctions or
breakdowns may occur when conductors come into contact with
each other.
6
<DRB1045>
En
Ground terminals
(for the second and
third CD player)
Controller section (front)
=
Speaker impedance
Connect speaker systems with a nominal impedance of between
8 and 16 ohms.
Setting of SPEAKER SELECTOR switch
When using only the built-in speakers, set the switch to the right.
When using both built-in and external speakers, set the switch to
the left side.