Pioneer CJ-V51 Bedienungsanleitung Seite 30

AUTOMATIC SERVICE MODE
(1) Password check
Format: 1lxxxxCR
Input the password ("xxxx") using the format shown above. A
password may be any number from 0000 to 9999. The password
is then checked, and ":" (3Ah) immediately followed by CR is
transmitted if the password is correct. Error code "E11CR" is
transmitted if the password is incorrect. If the password is
incorrect and other commands are then input, these commands
will not be accepted and the "E10CR" error code will be
transmitted. If the correct password is not entered by the third
try, any other command, including password check, will cause
the "E10CR" error code to be transmitted. The power of the unit
must then be switched off and the password check procedure
must be repeated from the beginning.
2-1-2. Request Command R
The request command is used to determine the types of data
stored in the CJ-V51 or the status of the CJ-V51. This command
is not accompanied by a data code.
Argument Function
Non-resettable playback audits reference
Non-resettable cash audits reference
Resettable playback audits reference
Resettable cash audits reference
Most popular song data reference
Most popular disc data reference
Error history reference
Number of times of cancellation by track
skips data reference
ONO WN —
9 ID No. reference
10 ROM version reference
11 Coin weight settings reference
12 Credit rates reference
13 Number of times of cancellation by track
skips reference
14 Auto-play interval time setting reference
15 DIP switch setting reference
16 Door open/close history reference
17 Power ON/OFF history reference
18 Number of songs selected in time band data
reference
19 Number of times each song selected data
reference
20 Total number of discs data reference
21 Priority songs reference
22 Lockout songs reference
(1) Non-resettable playback audits
Format: 1RCR
The following data is contained in non-resettable playback
audits.
@ Number of songs selected using free-of-charge playback
@ Number of songs selected using paid playback
@ Number of songs selected using most popular select
© Number of songs selected using album song select
© Number of times player operated
®
Data of no use
> Number of songs selected for repeat play
30
<DRB1045>
En
The data for an item is transmitted each time this command is
input (transmission sequence is @ through @). Each data item
may have a maximum of ten digits, and can range from O through
4,294,967,295. The command must be input again to obtain the
data for the next item because each data item is transmitted
accompanied with a CR. Repeat this operation until *:" (3Ah) is
transmitted with the data.
Example:
1RCR 123CR Data item @
1RCR 1CR Data item @
| | |
| | |
1RCR 456:CR Data item @)
(2) Non-resettable cash audits
Format: 2RCR
The following data is contained in non-resettable cash audits.
@ Total cash
@ Total (coin B)
® Total {coin C)
@ Total (coin D)
®© Total (coin E)
© Total (coin F)
® Data of no use
Ey
The data for an item is transmitted each time this command is
input (transmission sequence is () through ©). Each data item
may have a maximum of ten digits, and can range from O through
4,294,967,295. The command must be input again to obtain the
data for the next item because each data item is transmitted
accompanied with a CR. Repeat this operation until ':" (3Ah) is
transmitted with the data.
Example:
2RCR 123CR Data item @
2RCR 1CR Data item @
| | |
| | |
2RCR 456:CR Data item
(3) Resettable playback audits
Format: 3RCR
The following data is contained in resettable playback audits.
@ Number of songs selected using free-of-charge playback
@ Number of songs selected using paid playback
@ Number of songs selected using normal song select
@ Number of songs selected using most popular select
© Number of songs selected using album song select
Number of times player operated
®
Data of no use
®
®
@ Number of songs selected for repeat play