Pioneer CJ-V51 Bedienungsanleitung Seite 26

The "—" light up for the first two digits.
Input the value for the function mode (an upper digit or an
upper and lower digit) with the number keys.
(Example)
When the BEST HITS key is pressed, "beep" will sound and
changes to the execution mode.
When number(s) not existing in the function mode are input,
"beep-beep"
will sound and
it reverses to the
previous
display. Input correct number(s).
4. During execution
(1) SELECTION
REMAINING
Indicator
ce
:
ai
Cul
Alternately displays the submode (c2) and the function mode
(20) for approximately once a second each.
If an upper digit is specified for the function mode value, a
small "0" will be displayed for the lower digit.
(Example) ] Qa
« Submode 1
Up to 999,999 will be displayed.
The number will be displayed completely if the value is smaller-
than-or-equal-to 9,999.
If the number is greater-than-or-equal-to 10,000, the first two
digits and the
remaining four
digits will
be displayed
alternately.
(Example) Displaying 123,456:
ed
I456
© Submode 2
[Function mode 11 to 19, 10]
Displays the song number and the number of times of playback
alternately.
(Example) Playback of track No. 1207 for 57 times:
ed. i
5
(Displays periods and the first two digits.)
(Displays the remaining four digits.)
(Displays the track No. with periods.)
(Number of times of playback)
~J
ET
So
26
<DRB1045>
En
[Function mode 61 to 64]
The ID number is displayed in 3-digit, 3-digit, 2-digit and 3-digit
numbers.
[Function mode 7]
Displays the version of the built-in microprocessor.
a
i ae)
* Submode 3
[Function mode 1]
The coin symbol (B to F) and the minus (—) symbol are displayed
in the upper two digits, and the figures in the lower two digits
blink.
(Example) When selecting "B":
(Baler
Function mode
Set coin symbol Display
Numbers from O to 20 can be set to the lower two digits. Input
the numbers using the number keys and press the BEST HITS
key. A beep sound will indicate that the input is completed, and
value of the function mode will be increased.
When a function mode is set to "0", that coin will not be
accepted.
Operates after closing the door when finishing the service mode.
When pressing the BEST HITS key while displaying a value larger
than 21, the buzzer will emit a long beep sound and the display
will change to "0", ready for reinput.
NOTE:
Set the coin symbols B to F by matching them to the coin
symbols used in the MARS ELECTRONICS coin accepter
MS111B81. For the MS111, set coin B to O and match coins C to F
with the coin symbols.
[Function modes 21 to 29, 20 and 31 to 39, 30]
Set the rate of credit that is caused by inputting the coins. A
virtual number of input coins and a period symbol (.) are displayed
in the upper two digits, and the figures of the lower two digits
blink.
If O is set for all function modes 21-29, 20 and 31-39, 30, no
credit will be set when coins are input.