Pioneer CJ-V51 Bedienungsanleitung Seite 29

1. Interface
An
asynchronous — serial
format
is employed
as_
the
communication interface. The details are as follows.
1-1. Format
1-1-1. Connector Pins
Pins are 9-pin D-SUB. The pin functions are explained
below.
1-1-2. Signal Level
The signal level conforms to RS-232C standards.
1-1-3. Data Format
2-1. Commands
The commands consist of the following four types.
1. Input command |
2. Request command R
3. Clear command C
4. Set command S
Format:
argument ie F- ¢-0 O} > Rec See note 1.
argument RCR
argument CCR
argument S data CR
Note 1:
CR denotes the carriage return code (ODh).
Argument:
Data:
2-1-1. Input Command |
The input command is used to input data to the CJ-V51. This
data is referenced by the CJ-V51 without affecting the internal
data of the CJ-V51. This point distinguishes the input command
from the set command, which is described later.
Argument Function
1 Password check
Currently there is only one type of argument provided for input
commands.
29
<DRB1045 >
En