Install the side brush
Note: Install the side brush until it clicks into place.
Place the charging dock on the level ground against the wall and connect it to a
power outlet
Note:
Keep the immediate area 1.5m in front of the charger and 0.5m to both sides of the
charging dock clear to objects.
To ensure you can connect to the robot with your phone well, make sure the robot
and charging dock are within the range of Wi-Fi.
Do not place the charging dock in an area with direct sunlight or where other objects
might block the signal, as this may hinder the robot from returning to the charging
dock.
9
Tidy up Any
Loose Cord