Panasonic WJ-AVE3 Bedienungsanleitung Seite 20

e When the GRADUATION Button (19) is pressed, the LED
lights, the back colour is graduaded from the top to the
button of the video.
GRADUATION SELECT
Back colour ~ Graduated back colour
e The LEVEL Control (18) adjusts the colour level of the
back colour.
2-1. Back Colour with Superimpose Effect
(1) Press the COLOUR Button (33) in the Superimpose
Effect Block.
e Refer to the Superimpose Effect Block on page 12 for
details of operation.
(2) Apply the back colouring procedure as above.
2-2. Back Colour with Video Fade
(1) Press the COLOUR Button (32) in the Fade-in/Fade-out
Block.
COLOUR SELECT
e Refer to the Fade-in/Fade-out Block on page 15 for
details of operation.
-19-
(2)
Apply the back colouring procedure as above.
Audio Mixer Block
There are 3 audio source inputs on the WJ-AVES3, the
external microphone (MIC), the auxiliary audio input
(AUX) and the source audio input (SOURCE). Each
audio level can be adjusted independently by the audio
faders.
AUDIO MIXER
SOURCE AUX MIC
MAX MAX MAX MAX
MIN MIN MIN Min
3 @