Panasonic WJ-AVE3 Bedienungsanleitung Seite 13

B. Superimpose Effect Block
The WJ-AVE3 can store up to 2 images shot by
an external camcorder. Either the stored image or
the live image from the Camcorder can be used as
a superimposing source image. The following area
explains the Superimpose Effect Block.
SUPERIMPOSE. EFFECT
KEY LEVEL
\
REVERSE
Pi)
1. Superimposing of a live image from
the Camcorder
Shoot the camcorder at the Key Pattern.
(1)
S-VHS Camera for
Key Camera
(2) Press the SUPERIMPOSE EFFECT Button (40), the LED
lights.
SUPERIMPOSE EFFECT
ae ee
Press the DISPLAY Button (44), the LED fights.
Adjust the KEY LEVEL Control (45) to set the desired
level of the Superimpose Effect.
(3)
(4)
(5) If you want to add 4 features of Colour, White, Edge
and Reverse on the superimposed image, proceed with —
the following.
85)
|
(5)-1 Colour
Press the COLOUR Button (33), the LED lights.
8 colours are available. Refer to item-33 on page 6 for
details.
(5)-2 White
Press the WHITE Button (34), the LED lights.
The superimposed image becomes white by pressing
this button,
(5)-3 Edge
Press the EDGE Selector (35), the LED lights.
5 kinds of edges are available by pressing this button
repeatedly. Refer to item-35 on page 6 for details.
(5)-4 Reverse
Press the REVERSE Button (36), the LED lights.
The superimposed images and background image can
be reversed by pressing this button. However the
stored image will not be reversed by this button.