HBM MP60DP Bedienungsanleitung Seite 18

PME−MP60DP
Status 1
Bits Name
0 Ovfl
1 AOutOvfl
2 ScalErr
3 EEPROMErr
4 Limit1
5 Limit2
6 Limit3
7 Limit4
8 PAR1
9 PAR2
10..14 res
15 MViO
Tab 6.5: Contents of status 1
1)
Meaning of MViO:
NOR operation of: MesswOvfl, SkalErr, EEPROMErr.
MesswOvfl is the OR operation of ADCOvfl, HardwOvfl, GrossOvfl, NetOvfl
The parameter set number is coded in 2 bit binary:
Bit 8 Bit 9 Parameter set no.
0 0
1 0
0 1
1 1
Status 2
Double status word 2 returns detailed error flagging.
Bits Name
0 HardwOvfl
1 ADCOvfl
2 GrossOvfl
3 NetOvfl
4 AOutOvfl
5 MaxOvfl
6 MinOvfl
7 NegOvfl
8 Limit1
9 Limit2
10 Limit3
11 Limit4
12 ScalInError
13 ScalOutError
14 GainError
15 InitError
16 TransducerError
17..31 res
Tab 6.6: Contents of status 2
A0623-6.1 en/de/fr
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
EEPROM (parameter set) defective
Measured value in order
1
2
3
4
Meaning
measured values overflow
analogue output overflow
scaling defective
status of limit switch 1
status of limit switch 2
status of limit switch 3
status of limit switch 4
active parameter set bit 1
active parameter set bit 1
reserved
1)
(if bit 0,2,3=0)
Meaning
hardware overflow
ADC overflow
gross signal overflow
net signal overflow
analogue output overflow
maximum overflow
minimum overflow
overflow in negative direction
status of limit switch 1
status of limit switch 2
status of limit switch 3
status of limit switch 4
scaling input invalid
scaling output invalid
nominal value exceeded
works calibration defective
transducer error
reserved
17
HBM