Zigzag stitch and embroidery
For the zigzag stitch, the thread tension should be
somewhat looser than for the straight stitch. The
seam is more attractive and you will avoid gather-
ing if the upper thread appears on the underside of
the fabric.
Operating panel functions
Stitch length
1
LC display
2
Manual adjustment buttons for stitch width/
3
needle position
Buttons for manual adjustment of the stitch length
4
Overview of stitch patterns
5
Stitch number buttons
6
Stitch pattern number
7
Stitch width/needle position for straight stich
8
8
7
6
5
113223_Naehmaschine_Pfaff_Content_FR.indd 97
When you switch on the machine, the straight stitch
is set and a pop-up window appears on the LC dis-
play for individual adjustments.
To select a stitch pattern, use the left button to se-
lect the left digit and the right button to select the
right digit.
You sewing machine sews with a default/standard
stitch length and width.
The default settings are underlined on the display.
You can change the stitch length, stitch width or
needle position for the straight stitch.
Note: Some stitch patterns offer more possibilities
for manual adjustment than others.
1
There are 13 different needle positions available
2
for the straight stitch. The needle position is ad-
3
justed with the needle position button (see picture
below).
4
to the right
Stitch number buttons
Adjustment buttons for stitch
length/stitch width and needle
position
3
Needle positions for the
straight stitch
Stitch width
6
to the left
GB
97
02.02.15 10:00