Werbung
Verfügbare Sprachen
Verfügbare Sprachen
100 stitch pattern: 03
80 stitch pattern:
60 stitch pattern:
1
2
Bottom side
1
Setting the stitch width
and length
The dark grey field represents the standard
value that is automatically set when the pat-
tern is selected. The default setting for the zigzag
stitch is 2 mm and the stitch width is 5 mm.
The grey fields represent values that can be
manually set.
mm
0
0.3
0.5
0.8
1.0
1.3
1.5
1.8
2.0
2.5
3.0
Multiple zigzag stitch
SETTINGS:
Presser foot - standard foot
Upper thread tension - 5
106 GB
113223_Naehmaschine_Pfaff_Content_FR.indd 106
03
03
Top side
2
Stitch width
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
The multiple zigzag stitch is much stronger than the
normal zigzag stitch because it binds the fabric
with three stitches. It is therefore suitable for the
tidying and edging of all kinds of fabrics. It is also
ideal for bar tacking, for the reinforcement of worn
points, for the application of patches, sewing on
elastic bands, for sewing household textiles and for
quilting.
Note: A manual adjustment of the stitch length is
necessary for darning or finishing as shown in the
figure.
100 stitch pattern: 06
80 stitch pattern:
60 stitch pattern:
Shell stitch
SETTINGS:
Presser foot - standard foot
Upper thread tension - 5
Fold over the fabric edge and iron. Push the fabric
with the right side facing upwards under the
presser foot so that the tip of the stitch penetrates
just over the folded edge and pulls the fabric into a
shell shape. Trim the projecting fabric along the
seam.
Tip: For creative results, you can experiment
with different stitch widths and lengths as well as
thread tensions.
100 stitch pattern: 06
80 stitch pattern:
60 stitch pattern:
06
06
06
06
02.02.15 10:00
Werbung
