Internal Components - Systemair Save Vtr 150/B R 500W Betriebs- Und Wartungsanleitung

GB
Warning
• This product must only be operated by a person who has suitable knowledge or training within this field
or carried out with the supervision of a suitably qualified person.
• Beware of sharp edges during mounting and maintenance. Use protective gloves.
Warning
• All though the mains supply to the unit has been disconnected there is still risk for injury due to rotating
parts that have not come to a complete standstill.
Important
• The installation of the unit and complete ventilation system must be performed by an authorized installer
and in accordance with local rules and regulations.
• The system should operate continuously, and only be stopped for maintenance/service.
• Do not connect tumble dryers to the ventilation system.
• Duct connections/duct ends must be covered during storage and installation.
• Make sure that filters are mounted before starting the unit.

10.2 Internal components

Fig. 23 Internal components
Position Description
1 Mounting bracket
2
External connections
3
Main print card
4
Supply air fan
5
Internal electrical heater (500/1000 W)
6
Extract air filter
7
Supply air filter
8 Extract air fan
9 Rotating heat exchanger
212024 | A003, rev 29
Service | 49