Panasonic ES-LS6A Bedienungsanleitung Seite 21

Problem
The driving sound
changes while
shaving.
Makes a loud sound.
The odor is getting
stronger.
System outer foil gets
hot.
ES-LS6A_EU.indb 21
Action
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.
Apply oil.
The blades will not move
smoothly when there is no
oil on the system outer foil,
requiring more power.
The shaver makes a high‑
pitched sound due to the
linear motor drive. This does
not indicate a problem.
Confirm that the system outer
foil is properly attached.
Clean the system outer foil
with the brush. (See
page 17.)
Wash the system outer foil
with water. (See page 16.)
Clean the shaver.
Apply oil.
Replace the system outer
foil if it is damaged or
deformed.
(See page 18.)
Problem
Clean the shaver.
Apply oil.
You do not get as
Replace the system outer foil.
close a shave as
Expected life of system
before.
outer foil:
Service
Contact
Please visit Panasonic web site http://www.panasonic.
com or contact an authorized service centre (you find
its contact address in the pan european guarantee
leaflet.) if you need information or if the shaver or the
cord gets damaged.
Replacement parts
Replacement parts are available at your dealer or
Service Centre.
Replacement parts
System outer foil
for ES‑LS6A
Lubrication oil
Action
Approximately 18 months
WES9600
WES003P
21
2021/12/07 20:44:03