Panasonic ES-LS6A Bedienungsanleitung Seite 13

Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
[B] into the shaver�
2
Plug the adaptor [B] into
a household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor
after charging is completed�
Note
You cannot operate the shaver while charging.
Quick charge
Even though the battery runs out, you can shave
once after 3‑minute charge.
(This will differ depending on usage.)
ES-LS6A_EU.indb 13
While charging
glows.
2
The battery capacity
lamp will increase as
charging progresses.
Notes
• When charging the shaver for the first time or when it
1
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the
charge status lamp ( ) will blink quickly and the
battery may fail to charge properly in extremely high
or low temperatures.
• The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute dry‑shave usage per day in
an ambient temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
After charging is
completed
All the battery capacity
lamp and will glow and
then turn off after
5 seconds.
13
2021/12/07 20:44:00