Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the system outer foil
system outer foil
►Removing the outer foil section
Press the foil frame release buttons [A5]
and lift the outer foil section [A] upwards.
►Attaching the outer foil section
After turning the foil frame mark (
front, securely attach the outer foil section
[A] to the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons [A] and pull down the
system outer foil [A2].
• Do not press the system outer foil
release buttons with excessive
force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Align the foil frame mark (
mark ( ) and securely attach together until it clicks.
Note
Do not throw away the foil frame.
18
ES-LS6A_EU.indb
18
once every 18 months
) to the
) and the system outer foil
FAQ
Question
Outer foils and inner blades
Does this product
are integrated into the
require inner blades?
system outer foil.
The battery will deteriorate if
Will the battery
not used for over 6 months,
deteriorate if not used
so make sure to perform a
for an extended
full charge at least once
period of time?
every 6 months.
The battery used is a
Can I charge the
lithium‑ion, so charging after
shaver after every
every use will have no effect
use?
on battery life.
Charging the battery for more
Why should the
than 1 hour will not affect
adaptor be
battery performance, but
disconnected after
disconnect the adaptor for
charge?
safety and to save energy.
What is the
Constituent of the oil is
constituent of the
liquid paraffin.
dedicated oil?
The sound indicates that the
Why does the
battery capacity is running
appliance beep twice
low. Please charge the
after switched off?
appliance.
Answer
2021/12/07
20:44:03
Werbung
