Werbung
Verfügbare Sprachen
Verfügbare Sprachen
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 6:
Remove 2 Screws (No. 19) from the Main
Frame (No. 1) using Spanner (No. 95). Then
attach 2 Rail Covers (No. 17) to the Main
Frame (No. 1) with 2 Screws (No. 19) that
were just removed using Spanner (No. 95).
Attach the Seat (No. 38) to the Seat Tube (No.
3) with 4 Screws (No. 20) and 4 Flat Washers
(No. 11) using Allen Wrench (No. 97).
Attach the Backrest (No. 39) to the Seat Tube
(No. 3) with 4 Bolts (No. 41) and 4 Flat
Washers (No. 42). Tighten and secure with
Allen Wrench (No. 96).
Remove Screw (No. 40) from the Seat Tube
(No. 3) using Spanner (No. 95). Attach the
Backrest Cover (No. 28) to the Seat Tube
(No. 3) with the Screw (No. 40) that was just
removed using the Spanner (No. 95) to
secure.
STEP 7:
Remove 4 Screws (No. 49) from the Meter
(No. 100) with Spanner (No. 95).
Connect the Extension Wire 2 (No. 56) to
Meter Wire A (No. 100a) and connect the
Sensor Extension Wire 1 (No. 102) to Meter
Wire B (No. 100b). Then attach the Meter
(No. 100) to the bracket of Handlebar Post
(No. 2) with 4 Screws (No. 49) that were just
removed. Tighten and secure with the
Spanner (No. 95).
NOTE: Insert all wires to the tube of
Handlebar Post (No. 2). Do not cut or pinch
any wires when attaching the Meter (No. 100).
Insert the jack from Adapter (No. 55) to
adapter input on the front of Main Frame (No.
1), then plug the Adapter (No. 55) into an
outlet.
The assembly is now complete!
14
Werbung
