HBM SomatXR MX Kurzanleitung Seite 7

1 Getting Started
A4087-3.0 en/de
1.1 SomatXR Overview
The SomatXR Ultra-Rugged DAQ series is a modular and universally applicable
measurement system. The modules of this family can be individually combined
and intelligently connected according to the measurement task. The distributed
operation makes it possible to position individual modules close to the measuring
points, resulting in short sensor lines.
The SomatXR Ultra-Rugged DAQ series consists of the following modules:
MX Modules: The SomatXR MX modules are front end data sourcing modules
l
that can be used with the CX23-R Data Processor or the catmanAP and MX
Assistant software applications. They are configurable to interface to a diverse
range of transducers and sensors. Generic features for most MX modules
include precision measurement capabilities using 24 bit ADCs, TEDS sensor
support and multiple digital filtering options.
The following SomatXR MX modules are currently available:
MX1601B-R Standard Module: Up to 16 configurable inputs for DC voltage
o
sources (60 V, 10 V, 100 mV), DC current sources (20 mA) or current-fed
piezoelectric transducers (IEPE, ICP®).
MX1609KB-R Thermocouple Module: Up to 16 type K thermocouples
o
(NiCrNi) for measuring temperatures.
MX1615B-R Bridge Module: Up to 16 individually configurable inputs,
o
including strain gage-based transducers, standardized voltage and
resistance or resistance-based measurements.
MX840B-R Universal Amplifier: Up to eight (8) universal inputs for
o
connecting more than 16 transducer technologies including one connector
compatible with CAN inputs. (MX840B-R CAN is not supported by the
CX23-R Data Processor.)
MX411B-R Highly Dynamic Universal Amplifier: Up to four (4) inputs,
o
including strain gage and inductive bridges, standardized voltage and DC
current sources (20 mA) or current-fed piezoelectric (IEPE, ICP®) and
piezoresistive transducers.
MX471B-R CAN Module: Up to four (4) independent CAN bus nodes
o
electrically isolated from each other and from the power supply.
CX23-R Data Processor: The CX23-R hosts its own secure web-based data
l
recorder for intuitive and easy-to-use test setup, control, monitoring and data
visualization. The acquired test data is stored in the efficient and robust SIE file
format using a high-speed SATA storage drive. In addition, the CX23-R
provides direct data sourcing for six interfaces including digital inputs and
outputs, three CAN ports, one GPS and one auxiliary port (AUX).
EX23-R PoE Switch: The EX23-R is a ruggedized 10-port Gigabit switch that
l
supports IEEE1588 PTPv2 transparent clock time synchronization. Five ports
SomatXR
7