iRobot Combo j9+ Bedienungsanleitung Seite 12

Care and maintenance
Care and maintenance instructions for your robot
To keep your robot at optimal performance, make sure that you periodically
EN
perform the following basic care and maintenance.
There are additional instructional videos in the iRobot Home App. If you notice
the robot picking up less debris from your floor, empty the bin, clean the filter
and clean the brushes.
Part Care frequency
Mopping pad Clean after a mopping job
Bin Wash bin as needed
Filter Clean once a week (twice a
week if you have a pet). Do
not wash
Front caster wheel Clean every 2 weeks
Edge-Sweeping Brush Clean once a month (twice a
and Multi-Surface month if you have a pet)
Brushes
Full bin sensor Clean every 2 weeks
Charging contacts Clean every 2 weeks
Sensor, Camera window Clean once a month
and pad shelf
Note: iRobot manufactures various replacement parts and assemblies. If you think
that you need a replacement part, please contact iRobot Customer Care for more
information.
*Replacement frequency may vary. Parts should be replaced if there is visible wear.
8 For more information, visit global.irobot.com
Cleaning the mopping pad
HANDWASHING
Thoroughly wash the pad with
warm water.
Replacement frequency*
After 30 washes
Every 2 months
Every 12 months
Emptying the bin
Every 12 months
1
-
-
-
Note: You can clean your mopping pads in two ways: either by handwashing or in a washing
machine.
2
Press the Bin Release Open the bin door
Button to remove to empty the bin.
the bin.
MACHINE WASHING
Wash using the warm cycle, then air
dry. Do not tumble dry. Do not wash
with delicates.
3
Place the bin back
in the robot.