Herunterladen Diese Seite drucken

iRobot Combo j9+ Bedienungsanleitung Seite 11

Vorschau ausblenden Andere Handbücher für Combo j9+:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81
Troubleshooting
Troubleshooting your Robot
• Your robot will tell you something
is wrong by playing an audio alert
and the light ring indicator will turn
red. Press the cleaning button or
tap the bumper for details. Check
the iRobot Home App for further
support.
• After 90 minutes of inactivity off
the Charging Station, the robot will
automatically end its cleaning job.
• To factory reset your robot, remove
the bin and hold the cleaning button down for seven seconds. A sound will let
you know when the factory reset has been completed. Press the cleaning button
down once more to confirm.
BATTERY SAFETY & POSTAGE
For best results, only use the iRobot Lithium Ion Battery that comes with your robot.
WARNING: Lithium ion batteries and products that contain lithium ion batteries
are subject to stringent transportation regulations. If you need to post this
product for service, travel or any other reason, you MUST follow the postage
instructions below.
• Battery MUST be turned off before postage.
• Turn off the battery by removing the robot from the Charging Station and
holding down the cleaning button for 3 seconds with one wheel off the
ground. All indicators will turn off.
• Package the robot securely for postage.
• If you need further assistance, contact our Customer Care team or visit
global.irobot.com.
Red light ring
Low battery. Please charge.
Troubleshooting your Clean Base™ Auto-Fill Dock
Your Auto-Fill Dock will tell you if something is wrong via an LED indicator on top of
the Charging Station and through the iRobot Home App.
This product has been equipped with a thermal protector designed to protect
against damage due to overheating. If the protector operates, the motor will stop
running. If this happens, unplug the unit, allow it to cool for 30 minutes, clear any
obstructions from the Evacuation Port and Evacuation Tube, then plug the unit
back in.
Error LED Indicator
A solid red light will indicate
an error. Check the iRobot
Home App for information.
Common errors include:
Charging errors
Bag full
Bag missing
Bag improperly installed
Refill Tank empty
Water leak
Evac. clogged
Evac. error
Roomba Combo® j9+ Owner's Guide
EN
7

Werbung

loading