Care And Maintenance Instructions; Emptying The Bin - iRobot Roomba Combo i8+ Bedienungsanleitung

Care and Maintenance

Care and Maintenance Instructions

To keep your robot running at peak performance, perform the procedures on the following pages.
There are additional instructional videos in the iRobot Home App. If you notice the robot picking up less debris
from your floor, empty the bin, clean the filter, and clean the brushes.
Part
Bin
Filter
Full Bin Sensor
Front Caster Wheel
Edge-Sweeping Brush and Multi-Surface
Brushes
Sensors and Charging Contacts
Mopping pad
Wick cap
Bags
Charging Contacts IR Window
Blower Cover inside canister
Note: iRobot manufactures various replacement parts and assemblies. If you think you need a
replacement part, please contact iRobot Customer Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
Care Frequency
Wash bin as needed
Clean once a week (twice a week if you
have a pet).Do not wash.
Clean every 2 weeks
Clean every 2 weeks
Clean once a month (twice a month if
you have a pet)
Clean once a month
Clean after a mopping job
Replace if dirty or shows wear
-
Once every month
Once every month (remove debris from
blower cover)
Replacement Frequency*
-
Every 2 months
-
Every 12 months
Every 12 months
-
After 30 washes
-
Bags should be replaced when prompted
by the LED indicator/app
-
-

Emptying the Bin

1
Press bin release button to remove bin.
2
Open bin door to empty bin.
3
Place bin back in the robot.
Roomba Combo™ i8+ Owner's Guide
EN
6