iRobot Combo j9+ Bedienungsanleitung Seite 9

Mopping
• Your robot is able to both vacuum and mop at the same time.
• Your Clean Base will refill the water tank on your robot. When the Refill Tank
is empty, the Error LED Indicator will turn solid red.
• When your robot detects carpet during its cleaning job, it will lift and tuck the
mopping pad away.
STARTING A VACUUM AND MOP CLEANING JOB FROM YOUR CLEAN BASE™ Auto-Fill Dock
1
Use the pull tab to open the door. Remove
the Refill Tank.
Note:
the water tank and replace the mopping pad
WARNING: To prevent damage to your robot, do not
manually stow the mopping pad plate onto the pad
shelf.
2
Fill the tank with water or a compatible
Cleaning Solution.
Important: See page 6 for
Cleaning Solution compatibility
After completing your mopping and vacuum cleaning job, make sure that you empty
3
Place the tank back in the Clean Base and close
the door, making sure that it is completely closed.
4
Attach the mopping pad to the robot.
Roomba Combo® j9+ Owner's Guide
EN
5