iRobot Combo j9+ Bedienungsanleitung Seite 7

Using your Roomba Combo® with the Clean Base™ Auto-Fill Dock
Positioning the Clean Base™ Auto-Fill Dock
Good Wi-Fi® coverage
0.5 m (1.5 ft) 1.2 m (4 ft)
both sides from stairs
1.2 m (4 ft)
in front
*Objects are not to scale.
Download the iRobot Home App and connect to Wi-Fi®
• Follow the step-by-step instructions to set up your Roomba Combo®.
• Set up PrecisionVision Navigation to avoid obstacles in real time.
• Set an automatic cleaning schedule and customise cleaning preferences.
• Create smart maps to tell your robot where, when and how to clean.
Charging
CLEAN
Note: Position your Clean
Base™ Auto-Fill Dock on
hard-surface flooring.
Do not place it in direct
sunlight. Ensure that the
area around the Charging
Station is free of clutter
to improve docking
performance.
• Place the robot on the Charging Station to activate the battery.
• The robot uses a small amount of power whenever it is on the Charging Station.
You can put the robot in a further-reduced power state when not in use. For
instructions and more details on this Reduced Power Standby Mode, refer to the
WARNING: To prevent the
FAQ page on our website.
risk of your robot falling
• For long-term storage, turn off the robot by removing it from the Charging Station
down stairs, ensure that
and holding down the cleaning button for 3 seconds with one wheel off the
the Charging Station is
placed at least 1.2 metres ground. Store the robot in a cool, dry place.
(4 feet) away from stairs.
Note:
robot for 3 hours prior to starting the first cleaning job.
Light ring spiral while charging
White spiral: charging
Solid white: charged
Charging LED Indicator
On: Robot on dock charging
Off: Robot not on dock or robot not charging
Flashing: Mid-job charge & resume
Your robot comes with a partial charge, but we recommend that you charge the
When your robot is fully charged, the
light ring indicator will intermittently
pulse white on the bottom.
Roomba Combo® j9+ Owner's Guide
EN
3