Herunterladen Diese Seite drucken

Hach TitraLab AT1000-Serie Basis-Benutzerhandbuch Seite 8

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
Figure 2 Contents of the application box
1 Beakers (5 x 50 mL and 5 x 150 mL)
2 Tube with anti-diffusion tip (if necessary for the
application)
3 Conical adapters (quantity depends on application)
4 Magnetic stir bars
5 Legacy sensor adapter (not in all application kits)
6 Sensor (type and quantity depends on application)
Section 4 Installation
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
This is a class A product. There may be potential difficulties in ensuring electromagnetic compatibility in other
environments, due to conducted as well as radiated disturbances. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
Network and access point security is the responsibility of the customer that uses the wireless instrument. The
manufacturer will not be liable for any damages, inclusive however not limited to indirect, special, consequential
or incidental damages, that have been caused by a gap in, or breach of network security.
The instrument is available in different configurations (refer to
supplies instructions for the installation of an instrument with one syringe and one pump. Adjust the
installation procedure as applicable to accommodate the number of syringes and pumps in the
instrument.
8 English
7 Syringe holding ring (1 for each syringe)
8 Syringe (refer to
9 USB applications key
10 Glass bottles (not in all application kits)
11 Bottle caps (type and quantity depends on
application)
C A U T I O N
N O T I C E
N O T I C E
Table 1
Table 1
on page 6 for quantity)
on page 6). This manual

Werbung

loading