Herunterladen Diese Seite drucken

Hach TitraLab AT1000-Serie Basis-Benutzerhandbuch Seite 6

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 26
1 Keypad
2 Display
3 Sensor storage tubes
1
4 USB port
5 Tube holder
Note: Depending on the model, there will be 1 or 2 syringes and syringe input/output ports, and 0, 1 or 2 pumps.
Refer to
Table
1.
Model
AT1102
AT1112
AT1122
AT1222
3.3 Instrument connections
ElectricaI shock hazard. Externally connected equipment must comply with an applicable country
safety standard (e.g., IEC 60950-1 or IEC 62368-1 for IT equipment) and the circuit intended to be
connected to the equipment shall not exceed the SELV (safety extra low voltage) safe level.
1
A second USB port is found on the rear of the instrument, but the instrument recognizes only
one USB storage device connection at a time.
6 English
6 Beaker
7 Syringe protection cover
8 Syringe input/output
9 Tube clips
10 Syringe
Table 1 Instrument configurations
Syringes
1
1
1
2
D A N G E R
11 Sensor holder
12 Pump 2 input/output
13 Pump 1 input/output
14 Pump access cover
Pumps
0
1
2
2

Werbung

loading