Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Impairment of IP protection
When installed properly and completely, the device will have the required IP degree of
protection. Making structural modifications to the device or mounting it improperly can impair
its IP protection. This may result in explosions causing serious or even fatal injury.
▶
Attach plates (externally) without drilling any additional holes.
▶
Install the device only in the prescribed mounting position. More detailed explanations of
this can be found in the "Mounting" chapter.
Improper installation, commissioning, maintenance or cleaning
Basic work such as installation, commissioning, maintenance or cleaning of the device must
be performed only in accordance with the applicable national regulations of the country of use
and only by qualified persons. Otherwise, the explosion protection may be rendered
ineffective. This may result in explosions causing serious or even fatal injury.
▶
Only have mounting, installation, commissioning and maintenance work performed by
qualified and authorised persons (see chapter 3.2).
▶
Only make modifications to the device in accordance with the directions in these operating
instructions. Have R. STAHL or a test body (third-party inspection) carry out acceptance
testing on any modifications made.
▶
Gently clean the device with a damp cloth only – do not use scratching, abrasive or
aggressive cleaning agents or solutions.
3.3.2 Risk of Injury
Electric shock
During operation and maintenance, the device has high voltage applied to it at times.
Because of this, the device must be de-energised during installation.
Persons coming into contact with cables carrying excessive voltage can suffer severe electric
shocks and, consequently, injuries.
▶
Operate the device only on equipment with the internal voltage specified in the
"Technical data" chapter.
4
Transport and Storage
▶
Transport and store the device carefully, in accordance with the safety notes
(see the "Safety" chapter) and in compliance with the ambient and storage temperature
(see the "Technical data" chapter).
133275 / 8118605300
2023-08-10·BA00·III·en·09
Transport and Storage
Junction boxes
Series 8118
DE
EN
FR
IT
ES
RU
NL
DK
SE
FI
PT
GR
PL
CZ
SK
HU
SL
RO
BG
LV
LT
EE
CH
KR
CN
7
Werbung
